Etirama Superprint Flexibility – Multi Substrates
Configuration
- High performance flexo press, modular, for self adhesive labels
- UV drying system
- Hot-air drying system
- Equipped with up to 10 print stations
- Print speed up to 120 m/min
- Print width: 350mm
- Bobbin capacity up to 800mm diameter (unwinder/rewinder)
- Delam-relam (impression on adhesive)
- Web turn bar
- Double (or triple) die cut station
- Video camera by German brand BST
- Cold Stamping (UV lamination)
- Sheeter with conveyor + digital counter
| Print width | Max. 350mm / Min. 200mm |
|---|---|
| Maximum substrate width | 360mm |
| Maximum mechanical speed (1) | 120 meters/minute |
| Maximum number of print stations | Up to 10 units |
| Gear type in print stations | Helical CP 1/8″ (DP 26) |
| Minimum dimensions of plate cylinders | Z 70 (222.25mm / 8.75″) |
| Max dimensions of plate cylinders | Z 136 (431.8mm / 17″) |
| Minimum dimensions of die cut cylinders (2) | Z 70 (222.25mm / 8.75″) |
| Max dimensions of die cut cylinders | Z 136 (431.8mm / 17″) |
| Maximum diameter of waste bobbin | 600mm (23.5″) |
| Diameter of unwind & rewind mandrels | 3″ (76mm) |
| Compressed air | 6~8 bar with 25,000 l/h |
| Voltage requirements (3) | 380V – 3 phases (+/- 5%) |
| Voltage frequency | 50 Hz (+/- 2%) |
| Altitude | Max. 2,000 meters above sea level |
| Room temperature | 10°C to 25°C (50°F to 77°F) |
| Humidity | 30% to 80% (at 20°C / 68°F) |
| Room temperature | 10°C to 25°C |
| Humidity | 30% to 80% (at 20°C) |
| Applications | Self-adhesive papers & films (min. 15 microns),light cartons (max. 0.3mm) |