LC330 Compact Laser Finishing
LC330 Compact Laser Finishing
The LC330 is a compact, economic and fully digital laser finishing machine. Simply download the file from the pre-press department and the laser module is ready. The system can be fitted with an optional barcode reader for faster reload of existing jobs. The laser power ranges from 100-400 Watt (400-1000 Watt peak). It is possible to cut with different power levels on the same label. The standard LC330 has laser die, slitting and dual rewind. The unit is prepared for flexo varnish, spot varnish, lamination, cold foil and automatic knife box.
Characteristics
The GM LC330 comes on a standard 1m GM frame and is designed to fit into any GM converting line with minor electrical and mechanical modifications. A typical configuration is flexo-graphic varnish, laser cutting slitting and rewind – but other ore complex setups are possible.
QUICK DELIVERY
With near zero setup time for existing jobs and five minutes setup for new jobs this system counters the challenges of smaller runs and shorter lead times, thus ensuring day-to-day delivery of labels. An investment in the LC330 will give you continuous production and unlimited repeat lengths to increase efficiency and productivity.
COST SAVINGS
Save the cost of buying conventional die plates, and spare the time spent setting up a new job. The LC330 will increase the flexibility of your production facility to take on short runs and lead times, and is almost certainly the most cost-efficient laser die cut solution.
UPGRADE PATH
The LC330 system can be upgraded up to 1000 W. The laser mirror system and control cards will remain in the unit – only the laser source is upgraded. This ensures a long lifetime of the machine and the full benefit of future low cost high power lasers.
Technical Specifications
| Specifications | Metric | Imperial |
|---|---|---|
| Web width | 50 – 330 mm | 2 – 13″ |
| Substrate | 50 – 200 µm | |
| Speed | Up to 72 m/min (236 ft/min) depending on laser power and cut pattern |
|
| Rewinder | ||
| Diameter max. | Ø500 mm | 19.7″ |
| Core diameter | 25 – 152 mm | 1 – 6″ |
| Unwinder | ||
| Diameter max. | Ø700 mm | 27.6” |
| Core diameter | 76,2 or 152,4 mm | 3 or 6″ |
| Laser Die | ||
| Power | 100, 150, 250 or 400W | |
| Laser Type | Single head pulsed CO2 | |
| Laser Spot Size | 350 μm | |
| Flexo Station | ||
| Print cylinder size | 228 – 482,6 mm | 9 – 19″ |
| Spot varnish option (digital sensor register control) | ||
| Slitting Station | ||
| Knife Type | Pneumatic crush, shear or razor knife | |
| Minimum distance crush | 12,7 mm | 0.5” |
| Minimum distance shear | 10 mm | 0.4” |
| Power/Air | 3x400V+N+PE, 32A, 6 bar | |
| Dimensions (WxDxH) | 3,3 x 2,4 x 1,8 m | |
| Exhaust UV | Ø100 mm, 800 m³/h. Outside. | |
| Exhaust LASER | Ø160 mm, 800 m³/h. Outside. | |