DC330NANO Ultra Compact Converting
Ultra compact, cost effective unit for lamination, die-cutting and slitting. As digital label printing continues to grow, label-printing houses are realizing the need for all inclusive digital printing systems that provide value adding features for producing fully finished labels. The DC330NANO offers the ideal solution. The DC330NANO offers unwind, self-adhesive lamination, semi-rotary die cutting and length slitting on a compact 1.3m x 1.3m platform. The unit is ideal as converter for a small digital press or as a backup to an existing finishing line. The unit can run either offline or inline.
The DC330NANO is the most compact unit in GM’s series of label finishing machines. It Is built on the same rock solid die cut unit as our biggest DC units. A solid 20mm metal frame ensures a vibration free basis for the four large servo motors that drive the web. The DC330NANO can be set up as an inline extension to a digital label press, allowing the web to continue directly into the converter from the digital press or as a standard offline unit. With semi rotary die cutting, lamination and a genuine pneumatic knifebox with crush knifes it offers all you need for short run label production. If needed the DC330NANO can work as a “blanco” label die cutter as well.
All-in-one solution with many options
The DC330NANO has all you need to make labels. Lamination, die cut, slit & rewind as standard. Optional inline buffer module, back scorer, large Ø600mm rewind.
Precision cutting to reduce waste
Print-to-cut registration in just one rotation no station; no station movement or mechanical setup required; semi and full-rotary die cutting.
Speed and versatility
Adjustable repeat lengths from 2 – 22”; line speeds up to 32 m/min semi-rotary and 72 m/min full-rotary.
Semi-rotary speed up to 50 m/min with optional Productivity Pack.
Easy to use
The large graphical touch display shows the web-up and all function clearly in the local language.
Servo-driven web tension control
Ensures accurate processing over a wide range of substrates.
Measuring only 1,8 x 1,4 x 1,6 m this compact design will fit into any shop.
Easy web access and maintenance
The DC330NANO integrates the advanced semi-rotary converting and lamination on a very compact platform. It is one of the most compact and economic finishers in the market. The unit is ideal for start-up’s or existing digital printers looking for a backup unit.
|Web width||50 – 330 mm||2 – 13”|
|Substrate||50- 200 µm|
|Semi-rotary speed||32 m/min (50*)||105 ft/min (164*)|
|Full-rotary speed||72 m/min||236 ft/min|
|Die plate size (repeat)||50 – 558,8 mm||2 – 22”|
|Max. Internal unwind||Ø500 mm||19.7”|
|Max. Single shaft rewind||Ø400 mm||15.7”|
|Core diameter||76,2 or 152,4 mm||3 or 6”|
|Knife Type||Pneumatic crush|
|Minimum distance crush||12,7 mm||0.5”|
|Power/Air||3x400V+N+PE, 32A, 6 bar|
|Dimensions (WxDxH)||1,8 x 1,4 x 1,6 m|